Three 200Vdc models added to TDK programmable DC PSU series

These additions to the firm’s Genesys+ series are available with output power levels of 5kW, 10kW and 15kW. Three 200Vdc models added to TDK programmable DC PSU series

The 200V models are designed for testing solar panels, semiconductor fabrication, battery charging, DC motor control, heaters and process control applications.

All models in the Genesys+ series are capable of operating in constant voltage, constant current and constant power modes.


Up to six power supplies can be connected in parallel with a master/slave system that provides dynamic load response. TDK claims the connected supplies exhibit ripple and noise characteristics comparable with that of a single power supply.

The 5kW, 10kW and 15kW power levels can be ordered with a choice of a 170 to 265Vac, 342 to 460Vac or 342 to 528Vac three-phase input.

They share a common width of 423mm, and depth of 441.5mm.

A blank front panel option (with no metering or front panel control functions) is available for applications where user access is not required or needs to be restricted. Snap-on dust filters can also be added to combat airborne contamination.

Programming is standardised across the entire series by either utilising the front panel controls, remotely via LAN, USB 2.0 and RS232/485 communications, or by using the isolated analogue control and monitoring (0-5V, 0-10V) which are provided as standard.

There is also a choice of GPIB and the Anybus Compactcom interface platform for EtherCAT, Modbus-TCP and other interface options as they are released.

Software drivers, a waveform creator and a virtual front panel GUI are additionally provided in the software package.

The series offers a standardised set of safety features including safe/auto restart, last setting memory and built-in protection functions.

It’s also safety certified to IEC/EN/UL 60950-1, CE marked to the low voltage, EMC and RoHS directives and compliant to the industrial IEC/EN 61203-3 standard for conducted EMI, radiated EMI and EMC immunity.

Recommended Articles

  • Three 200Vdc models added to TDK programmable DC PSU series

    TDK adds lower power option to EZA series with 2500W dc-dc converter

  • Three 200Vdc models added to TDK programmable DC PSU series

    Farnell introduces Rohde and Schwarz NGP800 power supplies

  • Three 200Vdc models added to TDK programmable DC PSU series

    Chinfa DIN-Rail ac-dc power supplies available at Relec

  • Three 200Vdc models added to TDK programmable DC PSU series

    CUI adds GaN desktop adapters to ac-dc PSU line